4AI 4AO Wireless I O Module Analog Signal Transmission Controller
Wireless Analog IO Module 4AI 4AO Wireless RTU 4 - 20mA Analog Signal Wireless Transmission Controller
This pair of wireless RTU are used to collect sensors' 4-20mA signal and transmit to PLC/HMI in control room by wireless.
They are widely used in industry automation.
Parameter:
LS-RAI04 wireless analog acquisition module
LS-RAI04 Modbus RTU is a 1W I/O module, 4 analog inputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for sensor data wireless collection.
| Frequency |
433MHz or 450MHz or 470MHz |
| Power output |
1W |
| Products |
4AI |
| Input type |
4-20mA or 0-5V or 0-10V |
| Output type |
4-20mA or 0-5V or 0-10V |
| Resolution ratio |
24 bit |
| Accuracy |
±0.02% |
| Power supply |
9-36V DC usually use 24V DC |
| Interface |
RS-485 |
| Channel No. |
15ch default, can program via DIP switch |
| Antenna |
Sucker antenna with 1.5m cable |
| Working temperature |
-35 °C~+75 °C industrial |
| Working humidity |
10%-90% relative humidity, no condensation |
| Dimension |
115×90×40(mm) |
| Fix way |
Standard 3.5 inch industrial DIN guild rail |
LS-RAO04 wireless analog acquisition module
LS-RAO04 Modbus RTU is a 1W I/O module, 2 analog outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for sensor and PLC/HMI wireless communication.
| Frequency |
433MHz or 450MHz or 470MHz |
| Power output |
1W |
| Products |
4AO |
| Input type |
4-20mA or 0-5V or 0-10V |
| Output type |
4-20mA or 0-5V or 0-10V |
| Resolution ratio |
24 bit |
| Accuracy |
±0.02% |
| Power supply |
9-36V DC usually use 24V DC |
| Interface |
RS-485 |
| Channel No. |
15ch default, can program via DIP switch |
| Antenna |
Sucker antenna with 1.5m cable |
| Working temperature |
-35 °C~+75 °C industrial |
| Working humidity |
10%-90% relative humidity, no condensation |
| Dimension |
115×90×40(mm) |
| Fix way |
Standard 3.5 inch industrial DIN guild rail |
Advantage
- No wires to bury or maintain, no need to drill holes on wall
- Reliable communication in all direction,any terrain, regardless of hills, walls, trees
- Cost saving in installation and maintenance
- Radio based, no need internet and monthly fee, full ownership of the system
- 4G based, high speed, no distance limit
Lensen Wireless RTU features
- Portable device, DIN-rail mounting for easy installation
- Isolated inputs
- LEDs for power supply, communication, input, output status
- Flexible networking, point to point or point to multipoints
- DIP to change different modes
- Different types of I/O, DI, DO, AI, AO are available
- I/O expandable
- Short delay time
- Support I/O reduction, field input, remote output
- Easy handing on RS485 network, support Modbus RTU protocol
- Support on-line upgrade. Can configure by customer in setting mode
Product Tags:
|
|
4AI 4AO Wireless I O Module Analog Signal Transmission Controller Images
|
